Precision kits now available in 4 tiers:
The TSPROF K03 - precision-guided knife sharpening system. Become a knife sharpening expert with TSPROF K03.
Keep all your blades razor-sharp, sharpen for friends and family, make money from local knife sharpening or, if you hand make knives, take those edges to the next level.
Sharpening is all about the consistency of the angle and the precision behind it.
The TSPROF K03 is made of 100% CNC machined metal, the engineers look strictly at tight tolerance compliance; each unit passes strict quality control.
The same level of high precision machining is used in microscopes and modern machine tool industry.
While Sharpening the knife can flip over from 5 to 100 times per session. Flip the knife in a fraction of a second with the smooth TSPROF K03 rotary mechanism.
The designed clamps for standard and non-standard blades: kitchen, EDC, hunting, filet knife, machete, axe, planer knife, scissors, chisel, full flat, convex grind knife, machete, and many other types.
You can sharpen knives with any abrasive you like Diamonds, Natural stones, Synthetic and more, the K03 universal stone holder supports all stones 6" to 8.5" long, does not require 45° dove tails on each end.
Set any desired angle you want in a few seconds using just 1 control knob. Dial in the angle with the mechanical angle scale or digital angle cube to see the angle instantly and precisely.
The sharpener is built on a modular concept. Get the sharpener’s body and extend it with additional clamps, abrasives, and accessories.
The TSPROF K03 body Rack-and-pinion lift with seamless adjustment allows you to set the angle with an accuracy of 0.05°. The range of sharpening angles is from 7° to 35° per side, which allows you to sharpen knives at a total angle of up to 70°.
Note that that the maximum and minimum sharpening angle may vary according to the thickness of the stone thickness, type of the clamp chosen and overhang of the knife within the clamps.
Rotary mechanism the main body of the rotary mechanism is made of hardened steel.
Whole milled clamps are milled from high-strength aircraft aluminium. Due to the monolithic design of the clamps, their main advantage is the increased resistance to pressure on the stone, which ensures constant angles. When working with this type of clamp, calibration, and adjustment to different knife shapes are not required.
Whole milled fillet clamps are made of CNC machined aircraft aluminium and are designed for fixing knives with a spine thickness of up to 3.5 mm. The shape of the outer surface is radially convex, allowing you to set the minimum sharpening angles from 7.2°.
With these clamps, it becomes possible to sharpen knives with "Scandinavian bevels". Suitable for table and fillet-knives with a narrow spine.
The fillet clamps are made of a single piece of aluminium, which ensures symmetrical mounting. Thanks to two snap points, the deflection of the blade is minimized. It is possible to independently move the clamps along the entire length of the frame. There is no need for further calibration.
These clamps make it possible to sharpen: kitchen knives, fillet-knives, keychain-knives, dangerous razors, knives with "Scandi-bevels" and other long narrow knives.
The weighty 3.5 kg TSPROF steel base holds the system on the table and allows you to work without attaching the sharpening system body with a G-clamp.
The convex edge attachment is presented in the form of a replaceable adapter, which is mounted on the stone holder.
The convex edge is better than a traditional V-shape grind as it can withstand shock loads, such as when cutting reeds, coastal shrubs, and grass, large raw bones, dead branches.
Lenticular sharpening method is more effective for deep cutting compared to knives with V-shaped grind, provided that the blade thickness is similar - this is due to less 'sticking' to the material. This form is most suitable for long-bladed combat weapons, large knives, and logging axes.
Universal table is a special clamp designed for sharpening scissors, chisels, and other tools that are not installed in other clamps, these generally have a single bevel.
The Hard plastic case made by German company WAG with the TSPROF brand name, made of hard plastic, is used for carrying the K03 sharpening system securely.
Rotating symmetric single clamp for double-sided sharpening without knife reinstallation. The clamp design allows you to clamp knives rigidly and symmetrically with complex blade geometry. Suitable for hunting and folding knives with a wide spine. It is not recommended to sharpen knives with a narrow spine on a single clamp, since they can bend when sharpening. The minimum width of the knife is 20 mm, the spine thickness is 5 mm, the angle range is 10-32 degrees (for wide knives, the range may differ).
Get the latest news!