$150.00
| /
The TSPROF Diamond plate set is fantastic for repairing and refining a knifes bevel.
The set of diamond plates on blanks includes:
- F150 Extra Coarse diamond plate is used for roughing of the edge and forming the shape of the blade.
- F220 Coarse diamond plate is used for forming of the cutting edge.
- F400 Medium diamond plate is used for main sharpening operations and creating of the aggressive/biting cut.
- F600 Fine diamond plate is used for pre-finishing of the cutting edge and removing of noticeable marks.
- F1000 Very Fine diamond plate is used for finishing of the cutting edge.
These diamond plates work much more aggressively than stones on organic or metallic bond with the same grain size. It is achieved due to the exposed diamond grains, whereas grains of the organic or metallic bond get stuck in the binder and mixed with it.
The grain concentration in a layer is 100%. At the same time, it should be noted that in terms of the duration of work, such plates will be inferior to plates on other bonds due to a thin layer of spraying, which is actively erased during the sharpening process.
Also should note, that by working with soft steels (up to 58 HRC) these diamond stones will work out faster than by working with harder steels.
Diamond stones on galvanic bond don't require preparing before use and don't require lapping.
Plate dimensions:
4mm х 25mm х 150 mm
Grit scale:
- 150 grit (FEPA-F)
- 220 grit (FEPA-F)
- 400 grit (FEPA-F)
- 600 grit (FEPA-F)
- 1000 grit (FEPA-F)
